Manufacturers of Hydraulic Plate Compactor for excavators ensure that the selection and configuration of shock-absorbing pads meet the requirements of actual engineering operations. In the process of operation and maintenance, the following points should be noted:
1,Turning on the Vibrator: When performing compaction operations with a hydraulic vibratory compactor, start the vibration function. Before doing this, adjust the throttle controller to high speed, then turn on the vibration switch.
2,Switching Gears: When driving the Hydraulic Plate Compactor and switching between forward and reverse gears, be sure to first turn off the vibration switch, reduce the throttle, and then proceed with gear switching.
3,Regular Cleaning: Regularly clean any residue from the shock-absorbing pads.
4,Bolt Tightening: Before starting work, ensure that the bolts of the shock-absorbing pads are properly tightened.
5,Parking Precautions: When parking, check whether the excavator’s cylinder is experiencing arm drop. Arm drop can cause the arm’s weight to compress the shock-absorbing pads, reducing their elasticity and potentially damaging them.
6,Machine Storage: When the machine is idle, take proper measures to prevent aging. Avoid exposing the machine to extreme conditions such as high temperatures, direct sunlight, rain, or prolonged outdoor low temperatures.