Apr 04, 2020
The hydraulic breaker has become an important working tool for hydraulic excavators, and some people install it on excavating loaders (also known as two-end busy) or wheel loaders for crushing operations, also known as hydraulic breakers or hydraulic rock breakers.
The power source of the hydraulic breaker is the pressure oil provided by the pumping station of the excavator or loader, which can more effectively clean the floating stones and the mud in the cracks of the rock during the excavation of the building foundation. As we all know, steel brazing is one of the important components of the breaker. Due to its changing environment or unreasonable use method, it will malfunction, which will directly affect the operation effect. What should we pay attention to when we use it? Let me explain it to you, I hope it will be helpful to everyone.
Adjust the position. When the impact operation cannot crush the rock, the crushing operation shall not be continued at the same location, and shall be moved to a new operation location. If you work in the same position for a long time, the temperature of the steel braze will rise, reduce its hardness, and make the lower end of the steel braze roll up, thereby reducing the efficiency of the operation.
Pay attention to how to apply force. Using proper downward force can improve the efficiency of steel brazing.
Before leaving the equipment, lower the lower arm to confirm whether the equipment is in a safe state; when the engine is started, it is forbidden to leave all the brakes and locking devices on the equipment to be used effectively.
In the case of working in water, it is not allowed to dive any part of the hydraulic breaker into the water before allocating equipment for working in water.