The hydraulic breaker is an important excavator attachment that is commonly used in demolition, mining, and rock-breaking operations. Proper operation not only increases efficiency but also extends the equipment’s life. Here are the main precautions to take when utilizing a hydraulic breaker.
1. Use proper downward pressure
Moderate downward pressure increases the breaker’s impact efficiency, but too much force can overload the device. Adjust the pressure based on the material’s hardness to ensure successful breaking while safeguarding the equipment.
2. Set the Breaking Position in Time
If the breaker fails to smash the rock after several strikes in the same location, shift to a new position. Prolonged hammering in the same place can overheat the chisel, diminishing its hardness and creating deformation, lowering efficiency.
3.Do not misuse the chisel
The chisel is meant for vertical impact; do not use it as a lever to pry rocks or trash, since this might cause bending or fracture, increasing repair expenses.
4. Never operate underwater
Unless the breaker is specifically designed for underwater usage, avoid submerging it to prevent water from entering the hydraulic system and causing corrosion and damage.
5. Secure the equipment after use
Before turning off, lower the boom and place the breaker on the ground to guarantee stability. This prevents unintentional movement or tipping dangers.
Following these rules will improve the hydraulic breaker’s performance, reduce wear, and ensure a safe operation. Contact our experienced staff immediately for additional maintenance and operation recommendations!